Mildew prevention can be achieved by taking corresponding measures in three phases: before, during and after installation.
1. Reduce moisture before installation
Pay close attention to wall moisture content prior to installation to avoid mildew caused by excessive dampness.
a. Complete basic waterproofing work for the wall substrate.
b. Test wall moisture content; it must be below 8 % before installation.
a. Complete basic waterproofing work for the wall substrate.
b. Test wall moisture content; it must be below 8 % before installation.
2. Control mildew‑causing factors during installation
a. Adjust water ratio when mixing adhesive. Apply thick glue in thin coats to cut down moisture content.
Use short‑nap paint rollers for gluing to strictly control glue thickness.
b. Minimize mould contamination on‑site. Keep installation tools and water clean.
b. Minimize mould contamination on‑site. Keep installation tools and water clean.
Clean the working area in advance to reduce pollution sources.
3. Daily maintenance after installation
Post‑installation care is critical and greatly reduces mildew risks. Keep rooms well‑ventilated and dry.
Clean wall dust regularly.
If sugary drinks spill onto wall surfaces, wipe promptly with neutral detergent and dry thoroughly.
If sugary drinks spill onto wall surfaces, wipe promptly with neutral detergent and dry thoroughly.
Sugar residues serve as nutrients for mould growth.
Besides, you may opt for high‑mildew‑resistance wall decorations.
